Installation guide

OPERATING GUIDE.
56. SNMP Settings
The following information is available via SNMP:
• Serial number
• Firmware version
• MAC address / IP address / Netmask / Gateway of LAN interface
• Configured users
• Currently active users with login time (login time is only valid if time is
synchronized on Smart 16 IP)
• Server's power state
• The following actions can be initiated via SNMP:
• Reset server
• Power on/off server
• Reset Smart 16 IP
The following events are reported by Smart 16 IP via SNMP:
• Login trial at Smart 16 IP failed
• Login trial at Smart 16 IP succeeded
• Denying access to a particular action.
• Server was reset.
• Server was powered on/off
From the Smart 16 IP Menu choose SNMP settings. The SNMP Settings appear.
See Figure 27.
42.