Installation guide

SMART CAT5 SWITCH 16 IP.
NOTE: The order of the rules is important. The rules are checked in ascending
order until a rule matches. Rules below the matching one are ignored. The default
policy applies if no match has been found.
Append a rule - Enter the IP/Mask and set the policy. Then press
.
Insert a rule - Enter the rule number, IP/Mask and set the policy. Then press
.
Replace a rule - Enter the rule number, IP/Mask and set the policy. Then press
.
Delete a rule - Enter the rule number and press
.
Anti Brute Force Settings
Anti Brute Force Settings lets you block access to a specific user, for a fixed
amount of time if a predefined number of unsuccessful login attempts by this user
occurred.
Max. number of failed logins – insert a maximum number or leave it blank.
Block time - Block time in minutes - insert a number or leave it blank.
41.