User guide

KVM.NET
®
II
96
Figure 89 Virtual Media
2. Select the device to be mounted and click Mount. A Remote Device Warning
appears, see below.
Figure 90 Remote Device Warning
3. Click OK. The device mounts onto the Target and appears as a removable or
CD/DVD drive of the Target. It also appears in the Mounted Drives section in
Figure 89. Once mounted, you can use the device during the remote session as if
it is connected to the Target.
Mounting an ISO file
An ISO image (.iso) is a disk image of an ISO 9660 file system, and refers to any
optical disc image, even a UDF image. In addition to the data files in the ISO
image, it also contains all the file system metadata, including boot code,
structures, and attributes. All of this information is contained in a single file.
These properties make it an attractive alternative to physical media for the
distribution of software that requires this additional information as it is simple to
retrieve over the Internet.
To mount an ISO file, click Mount ISO File, locate the file and mount it.