User guide

USER GUIDE
89
Select Filter - defines the filter of the input video from the server. A higher filter
reduces the noise level but makes the image heavier. This means that the image
quality is better, but it takes longer to load and to refresh.
Noise Level - represents the Video "noise" when a static screen is displayed.
12.2.5.3 Auto Video Adjust
To adjust the video automatically:
Click Auto Video Adjust. The process takes a few seconds. If the process runs for
more than 3 times, there is an abnormal noise level. Check the video cable and
verify that no dynamic video application is running on the Target’s desktop.
Perform the procedure where necessary for each Target or new screen resolution.
12.2.6 Keyboard key sequences
Click . A list of defined keyboard sequences appears. When clicked, these
transmit directly to the Target, and will not affect the Client computer.
For example, select Ctrl-Alt-Del to send this three key sequence to the Target to
initiate its Shutdown/Login process.
To add a keyboard sequence:
Click Add/Remove. The Special Key Manager box appears see Figure 82.
Figure 82 Special Key Manager box
To add a predefined sequence:
1. Click Add Predefined. A list of sequences appears.
2. Select the desired sequence and click OK. The sequence appears in the Special
Key Manager box.
3. Click OK. The sequence appears in the Keyboard Key sequence list.