User guide

KVM.NET
®
II
86
Or Press F9.
To display the Toolbar repeat the above action. See also page 95.
12.2.3 Switching to a different server
There are 2 methods of switching to a different server.
(A) Select a different Target from the KVM.net II Access page.
(B) Where the Target you wish to switch to is connected to the same IP device as
the current Target:
1. From the Toolbar, click , or right-click . A list of available servers
appears. The currently connected server is highlighted in bold.
2. Click the desired server name. The screen of the selected server appears.
For DXU IP II - In KVM.net enabled and Managed modes, - First login to the
KVM.net II and then select the server you want to access on the Access page. If the
system is working in KVM.net enabled mode, the AIM login will appear. Login to
the AIM and then select the required server from the IP toolbar again. Switch
between the servers using the IP toolbar or KVM.net II Manager.
Important! Accessing or switching to the servers from the IP toolbar, only works
when the DX AIM is on the Servers/Devices page.
12.2.4 Changing the performance settings
You can alter the bandwidth settings from the Toolbar.
To alter the settings:
From the Toolbar, click . The Settings.. Dialog box appears, see Figure 80.