User guide

USER GUIDE
83
12. Accessing Targets - Administrator
For an Administrator to access a Target:
From the menu, select Access. The Access page appears showing the individual
Targets the Administrator is currently allowed to access. See Figure 77.
Individual Target
names
Current status of
Targets
Target sets appear as
sub-folders
Name of connected
user (if any)
Icons of assigned
access services
Default access
service icon
Power management icons appear in
this column - (when relevant)
Description of Target
as input by the
Administrator
Figure 77 Access page
12.1 Access page columns
The Access page columns contain the following:
12.1.1 Power management column
When there are RPS power management devices connected to the targets / KVM
switches, a Power icon appears in this column, from which you can power manage
the Target.
12.1.2 Name column
This column includes the name of the Target and the default Access Service icon.
This icon represents the Access Service that is used by default to access the Target
when the Target name (or Access Service icon) is clicked. To use a different
Access Service, click it in the More Access Services column.
12.1.3 Status column
The Status column gives the current status of the Target as follows:
Available –A user can press the Target name link and establish a remote session to
that Target.