User guide

USER GUIDE
71
URL – If the Access service resource can be reached via a web browser, type the
URL here: HTTP or HTTPS etc. You may incorporate variables such as into the
URL as follows:
• %ProgramFiles% - Program Files folder
• %SystemRoot%\ - Windows folder
• %IP% - IP address (IP checkbox must be selected)
• %Port% - TCP port number (Port checkbox must be selected)
• %UserName% - Login User name.
• %Password% - Login Password. Login Method checkbox must be
selected.
Application Path – if the new service has an executable application the application
must be installed on all client computers, preferably in the same path. The
application could be in any drive in e.g. the following folder -
%ProgramFiles%\Access service. Type the Application Path and executable name,
including all command line switches, options and parameters.
IP – Where relevant type the IP address of the Access service resource.
Port – Where relevant, type the port number.
Login Method: If you need a login method choose from the following:
• Prompt for Credentials – this means the access service login appears and
you login manually.
• Use KVM.net Credentials – this means KVM.net II logs into the access
service with the currently logged user credentials. Ensure that the access
service is configured to recognize the same User Name and/or Password.
• Use the Following Credentials – Where the User Name and Password are
different for KVM.net II and the access service, select this option. User
Name and Password fields appear. Type the access service User Name
and/or Password. KVM.net II logs into the access service using this User
Name and/or Password.
Save the new service. The new service appears on the Access Services page.