User guide

KVM.NET
®
II
68
Figure 61 RDP – Web mode
In Web mode there is only manual login.
10.1.8 Telnet
Click Telnet. The following are the default settings for Telnet.
Figure 62 Telnet
Description: - Description of the Access service - Telnet.
Application - PuTTy.exe is the application used for Telnet access. The PuTTy
application can be obtained from:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
PuTTy Application Path: - - PuTTy application must be installed on all client
computers, preferably in the same path. In the default path
%ProgramFiles%\PuTTy – see Figure 62 – the application could be in any drive in
the Program Files\PuTTy folder. See the General notes above about variables.
URL/Host: - Type the URL/Host of the Telnet resource.
Port – The Telnet port number is 23 (default).