User guide

KVM.NET
®
II
62
10.1.3 Web
Click Web. The Web settings appear, see Figure 54.
Figure 54 Web Target
Description: - Default description.
Set the URL for each individual web page as explained on page 73.
10.1.4 ILO
Click ILO. The ILO settings appear, see Figure 55.
Figure 55 ILO – SSH mode
Description – Description of the access service - ILO.
URL/Host – Type the URL/Host of the ILO resource.
Port / Application / PuTTy Application Path – these fields are only relevant in
SSH mode. The difference between SSH and Web mode is detailed below.
SSH mode (default)
SSH mode uses an ILO console server. In SSH mode the PuTTy application must
be installed on all client computers, preferably in the same path. In the default path
%ProgramFiles%\PuTTy - see Figure 55 – the application could be in any drive in
the Program Files\PuTTy folder. See the General notes above about variables.
The PuTTy application can be obtained from:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html