User guide

USER GUIDE
33
Figure 27 KVM/IP Device / Port number
To remove an assigned Target from an IP device/ KVM switch port click
. The assignment is removed.
Other KVM/IP elements are as follows:
Description – Type a description for the Target. E.g. Backup server.
Operating System – Select the operating system of the Target from the Drop-
down list. The mouse parameter options adjust to match the operating system.
Acceleration / Threshold – When the Target’s mouse settings are not default
select the appropriate values. Match the values to that of the server’s mouse.
Note! (Relevant to all IP devices except PX USB) For Windows XP, 2003 Server, Vista
and 2008 Server. Go to the Mouse settings on the Target and uncheck Enhance
pointer precision.
USB Converter - When an IP device connects to a server via a USB to PS/2
adapter, or ROC/RICC USB, or X RICC USB or Specter USB, select the USB
Converter checkbox. The USB conversion affects the mouse emulation and the
USB Converter helps to synchronize the mouse.
Also when an IP device is connected to a Linux server, select the “USB Converter”
checkbox.
Absolute Mouse – Select Absolute Mouse checkbox for a Target connected to a
PX USB which has Windows ME or later operating system.
See section 11 on page 72 to configure other Access services.
7.2 Target Sets tab
Creating Target Sets is explained in section 7.6 on page 35. Once you have created
Target Sets you can put Targets into Target Sets, giving access rights to all Targets
in a Set to all members.
1. Press the Target Sets tab. The following appears.