User guide

USER GUIDE
109
5. Select Secondary Unit. A field for the IP address of the primary unit appears.
6. Type the primary unit IP address.
7. Click . The unit restarts in Secondary Unit mode.
15.4.3 Configuring the primary unit
1. From the primary unit login to the KVM.net II Manager Web interface.
2. From the Settings/Maintenance menu, click Replication, Figure 97 appears.
3. Select Primary Unit. The page now appears as follows:
Figure 98 Replication page - Primary Unit
4. Type the IP address of the secondary unit.
5. Click . The database constantly replicates to the secondary
unit.
6. The Secondary Unit status changes to Replication is on.
15.4.4 Promoting a secondary unit to a standalone unit
When a primary unit is down or malfunctioning, you can promote the secondary
unit to be a standalone unit.
To do so:
1. At the secondary unit login as an Administrator to the KVM.net II web
interface.
2. From the Settings/Maintenance menu, click Replication, Figure 97 appears.
3. Select Standalone Unit. The unit restarts in Standalone mode.
4. Re-login to the unit.