User guide

KVM.NET
®
II
102
To access the Target:
Click the icon in the More Access Services column on the Access page.
Access to the Target works according to the type of service accessed and according
to the parameters as configured in section 10 on page 60. There is no difference
connecting to KVM/IP or to any other Access Service (VNC, RDP etc.).
13.3.3 Changing the password
Click the user name below KVM.net II . The Change
Password window appears, see Figure 92.
Figure 92 Change Password window
Type and retype a new password, then press Save. The new password is saved.
An Administrator can change his password in the same way.