User guide

KVM.NET
®
II
100
13. Accessing the system as a User
Once the Administrator has set up and configured the KVM.net II system, Users
can access the system and connect to permitted Targets.
For a User to access the system:
Type the KVM.net II Manager IP address (https://IP address) into a Web browser
and press Enter. The Login page appears.
Type the Username and Password and press Enter. The Access page appears see
Figure 91. The window displays only Targets and Target Sets that the User has
permission to access.
Note! KVM.net II system supports multi-user login. There is no limit to the
amount of concurrent users.
Target sets appear as
sub-folders
Target with default
access service
Click an icon here to
access the Target with a
non-default access
service
Power icons
in power
column
Figure 91 User Access page
13.1 Power column
When there are RPS power management devices connected to the targets / KVM
switches, a Power icon appears in this column, from which you can power manage
the Target.
13.2 Status column
The Status column gives the User the current status of the Target as follows:
Available – The user can click the Target name or Access Service icon and
establish the remote session to that Target.