User`s guide

Upgrading the Supervisor Phantom firmware
8-3
Installing the software
To install the
Phantom Update
software:
From a CD
1. Insert the
Phantom Update
CD. The
Phantom
Update
software runs automatically.
2. Follow the on screen instructions.
From two diskettes
1. Insert diskette 1 in the floppy drive.
2. From the
Start
menu, choose
Run
.
The
Run
dialog box appears.
3. Type
a:\setup
and click
OK
.
4. Follow the on screen instructions.
Starting and Configuring Phantom Update
1. From the
Start
menu, choose
Programs/Phantom
Update/Phantom Update
. The
Phantom Update
window appears. See Figure 8-2.
Slave
computers
Manager
box
Status
box
Figure 8-2 The Phantom Update window