Manualshelf

User`s guide

ManualsBrandsMinicom Advanced Systems ManualsSwitchRJ-45
61626364656667686970
Connecting the Communication cable
8-2
5UM20044
Version 10400
Connecting the Communication cable
To download firmware, you need to connect the
Communication cable. See Figure 8-1.
To connect the Communication cable:
1. Connect the Communication cable’s Stereo plug to
the
Phantom Manager’s
Communication port.
2. Connect the Communication cable’s DB9F connector
to the DB9M Serial port on the CPU’s rear panel.
DB9F to CPU’s
Serial port
Stereo plug to
Phantom
Figure 8-1 The Communication cable
Note!
The length of the Communication cable determines
the distance between the
Phantom Manager
and the
computer on which you install the
Phantom Update
.