User`s guide

Password protecting the OSD
7-5
To set up a password:
1. Navigate to the desired line number.
2. Type:
(i). Login name in the
Name
column.
(ii). Password in the
Password
column – between 1
and 8 characters.
(iii). Status in the
Status
column -
A
for
Administrator,
S
for Supervisor and
U
for
User.
3. Press
Esc
.
Changing a password
The Administrator can change any Name, Password or
Status, from the
Password Set Up
window.
To change a password:
1. Navigate to the desired line number.
2. Type the desired change.
3. Press
Esc
.
Reverting to the default password
It may happen that the Administrator forgets the password,
if so, he can revert to the default password. This involves
closing and opening jumper
JP4
on the PCI
Manager
card. Once you do this, the system will recognize the
default password.