User`s guide

Enabling password protection

7-2

5UM20044

Version 10400

Enabling

password protection

By default, password protection is disabled. Enabling

password protection involves opening a jumper on the

PCI

Manager

card.

To enable password protection:

For the Card version

1. Switch off the

Manager

computer; disconnect the

power cord and all other cables. Remove the cover.

2. Extract the

Manager

card.

3. Locate Jumper

JP2

and open it. See Figure 7-1 and

Figure 7-2.

umpers

JP2, JP3,

and JP4

Figure 7-1 The Manager card

JP2 JP2

Closed - Password

disabled

Open - Password

enabled

Figure 7-2 Jumper JP2