User`s guide
Reverting to the factory set OSD
6-14
5UM20044
Version 10400
Jumper - Closed Jumper - Open
Figure 6-9 Jumper closed and open
4. Reinsert the
Manager
card and replace the cover.
5. Reconnect the power cord and all cables, and switch
on.
6. Wait ten seconds. Switch off, and disconnect the
power cord and all cables.
7. Remove the cover, and extract the
Manager
card.
8. Open Jumper
JP3
.
9. Reinsert the
Manager
card and replace the cover.
10. Reconnect the power cord and all cables, and switch
on.