User`s guide

The Setup window
6-10
5UM20044 Version 10400
The Slave computer setting
Determine the setting for the
Slave
computer in the
DRV
column by matching the operating system and mouse type
of each computer in the table. See Appendix D.
Changing the setting in DRV column
To change the setting in
DRV
column:
1. Place the cursor on the first character.
2. Press the
Spacebar
. The display interchanges
between the different possible settings. Continue
pressing until you reach the required setting.
3. Press
Esc
.
Note!
When you don’t know which mouse driver is
installed, set the listing in the
DRV
column to
PS
.
The MOUSE column
The
Mouse
column and the
DRV
column are interrelated.
When you change the setting in the
DRV
column, the
listing in the
Mouse
column will automatically change to
match the
DRV
column.
Changing the OSD Display Hot-key
The default Hot-key to display the OSD, is
Shift
,
Shift
.
You can replace this Hot-key with any of the following:
•
Ctrl
,
Ctrl
.
•
Ctrl
,
F11
.
•
Ctrl
,
F12
.