User`s guide

The Setup window
6-8
5UM20044 Version 10400
Navigating between the SCAN and DISP columns
To move horizontally, between the first digit in the
SCAN
column and the first digit in the
DISP
column:
Press
Tab.
Or;
The
Right
and
Left
Arrow keys.
Changing the time span of a group of
computers
You can change the time spans of the
SCAN
and
DISP
columns from a particular computer downwards.
To change the time span:
1. Navigate to the time span of the first computer you
wish to change.
2. Type the desired change.
3. Press
End, End
. The remainder of the column takes
on the same change.
4. Press
Esc
.
Removing a computer from the scanning
sequence
To remove a computer from the scanning sequence:
1. Type 000 in the
SCAN
column.
2. Press
Esc
.