User`s guide

Connecting the System to the Power Supply
5-18
5UM20044 Version 10400
Chapt er 5:
Connecting the System to the Power Supply
The Card version
The
Manager
and
Slave units
draw their power via
the computer’s motherboard.
The Box version
The
Manager
and
Slave units
draw their power from
the electricity supply via a Power adapter and Power
cord.
Connecting the Power Adapter and Power Cord
1. Connect the Power Adapter’s DIN4M connector
to the
Slave’s
Power connector.
2. Connect the Power Adapter’s Power connector
to the Power cord.
3. Connect the Power cord to the wall socket.
The Supervisor Phantom
configuration
Figure 5-17 below shows the
Supervisor Phantom
Card
system connections in detail.