User`s guide

Connecting the System
5-15
Connecting the Supervisor Phantom
Units to an AT type computer
You can connect all the units of both the
Card
and
Box
versions of the
Supervisor Phantom
, to an AT
type computer.
There are two adapter cables for the
Phantom Slave
,
and three for the
Manager
or
Slave
with a LWS.
Note!
You must always use a PS type mouse.
Adapter cables for the Slave Unit
The two cables are:
•
Mouse adapter cable. See Figure 5-14.
•
Keyboard In adapter cable. See Figure 5-15.
Both cables connect to the
Slave
Keyboard/Mouse
cable. See Figure 5-9 on page 5-9.
MiniDIN6F to
MiniDIN6M MOUSE
IN Connector
DB9F to CPU’s Serial
Mouse port
Figure 5-14 The Mouse adapter cable
DIN5M to CPU’s
Keyboard port
MiniDIN6F to
MiniDIN6M
KEYBOARD IN
Connector
Figure 5-15 The Keyboard In adapter cable