User`s guide

Connecting the Supervisor Phantom Manager Unit
5-4
5UM20044 Version 10400
To connect the System cable to the
Phantom
Manager
:
1. Connect one of the System Cable’s RJ45M
connectors to the
Phantom Manager’s
System
Out port.
2. Connect the other System Cable’s RJ45M
connector to a
Phantom Slave’s
System In port.
Keyboard/Mouse In/Out cable for PS
type computers
Figure 5-5 below illustrates the Keyboard/Mouse
In/Out cable.
To connect the Keyboard/Mouse In/Out cable to the
Phantom Manager
:
1
. Connect the cable’s MiniDIN8M connector to the
Manager
’s Keyboard/Mouse In/Out port.
2. Connect the MiniDIN6F Mouse Out connector to
the mouse’s MiniDIN6M connector.
3. Connect the MiniDIN6M Mouse In connector to the
mouse port on the CPU’s rear panel.
4. Connect the MiniDIN6F Keyboard Out connector to
the keyboard’s MiniDIN6M connector.
5. Connect the MiniDIN6M Keyboard In connector to
the Keyboard port on the CPU’s rear panel.