User`s guide

Installing the Card version of the Supervisor Phantom
4-1
Chapter 4: Installing the
Card version of the
Supervisor Phantom
Prior to installing the
Card
:
Switch off all computers.
Disconnect all power cords.
In order to avoid electrostatic damage to the
Card
;
discharge any static electricity you may be carrying.
You can do this by touching any grounded object.
To install the
Supervisor Phantom Card
:
1. Remove computer covers.
2. Insert the
Manager
unit into any available PCI
slot of one computer.
3. Insert the
Slave
units into any available PCI slot
of the other computers.
4. Replace computer covers.