User guide

SERIAL REMOTE POWER SWITCH
8
10. Click OK. The Hyperterminal appears. See Figure 9.
Figure 9 Hyperterminal
11. Click File/Properties, Settings tab. Figure 10 appears.
Figure 10 Settings tab
12. Ensure the values are as set out in Figure 10. Check Windows keys and select
Auto detect for Emulation.
13. Click the ASCII setup button. Figure 11 appears.
14. Ensure the values are as set out in Figure 11. Check the 2 top fields, and change
Character delay to 1.
15. Click OK.