User guide

USER GUIDE
15
13. Operating the SRPS via IP Control
1. Configure the IP Control to work with the SRPS. From the IP Control
Administration menu click Serial Settings the Serial Settings appear, see Figure
17. See the IP Control User Guide for more details.
Figure 17 Serial Settings
2. Check the Assign to SRPS box and save. The system is ready to work.
3. From the Toolbar, click , or right-click . A list of connected
servers/devices appears.
4. Click the desired server or Serial device. The screen of the server or the Serial
device window appears.
5. From the Toolbar, click . The Power menu appears, see below.
Figure 18 Power menu
6. To send a power cycle command or to power down or up the currently accessed
Target server, select the appropriate option.
Note! Only the currently accessed Target server is affected, so to power manage
other Target servers you must access each one individually.
See the IP Control User Guide for more details.