User guide

SERIAL REMOTE POWER SWITCH
10
Description Command Comment
Set real time ^isS020TMEyyyy,mm,dd,n,HH
MM
yyyy is year
mm is month
dd is date
n is Monday to Sunday (1-7)
HH is hours MM is minutes
Set Safe shutdown
enable/disable, X 1 is
enable, o is disable
^isS018SUDX,X,X,X,X,X,X,X Outlet (1-8)
Get safe shutdown
setting status
^isP003SUD ^iD015X,X,X,X,X,X,X,X(outlet 1-8)
Set Power Return SW on
delay time, n is 1-8,
SSSSS is seconds. Max
65535 sec.
^isSxxx(len)DLYn,SSSSS ^isS006DLY1,4
Set Client Device No ^isS005DNOxx xx is Client Device No
XX is Client
Device(Binary)
^isS005DEVXX XX is two byte binary value, bit 15-bit0
indicates ID16 to ID1
Set power return delay
time, n is 1-8
^isP004DLYn ^iD00500004, time is in seconds
Set telephone interface ^isS003TEL
Set reboot enable/disable ^isS018RBTX,X,X,X.X.X.X.X
Get reboot setting status ^isP003RBT
Set all outlets on/off
command, X 1 is all on, 0
is all off
^isS004ALLX
Set shutdown time, n is
outlet(1-8), SSSS is
Seconds max 9999 sec.
^isSxxx(len)DLTn,SSSS ^iS006DLT1,4
Get shutdown time, n is
outlet(1-8)
^isP004DLTn ^iD00500004, time is in seconds
Set output group status.
N is (0-8) 0 is total
outlets,(1-8) indicate A-H
outlets
^isP004ST1n
(for future implementation,
maybe support)
^iDxxxFFF,VVVV,IIII,WWWWW,PPP xxx is
length, FFF is output frequency (unit .1Hz),
VVVV is output voltage (unit .1V), WWWWW
is output power in watts, PPP is percent of
power capacity
Some examples
To Type
Power off SRPS 1 Outlet D ^isS005ADR01^isS004OFS4
Power on SRPS 2 Outlet B ^isS005ADR02^isS004ONS2
Get the Safe Shutdown Status of SRPS 1 ^isS005ADR01^isP003SUD
Set Safe Shutdown of SRPS 1: ON at outlet
B,D,H and OFF at A,C,E,F,G
^isS005ADR01^isS018SUD0,1,0,1,0,0,0,1
Get shutdown time of SRPS 3 Outlet E ^isS005ADR03^IsP004DLT5