Installation guide

INSTALLATION GUIDE
25. Controlling the RS232 Specters
You can control the RS232 Specters from the Telnet window of the Phantom MX
IP when the system is connected over the Ethernet.
Connect the Null Modem cable to the MX IP as illustrated in the figure below.
MX IP
SD
P110
To Serial
1 port
Null Modem
cable
www.minicom.com
POWER
85-265VAC 50/60 Hz
COMPUTER
SYSTEM2
nd
USER OUT IN SERVICE
RST
SERIAL 3
ETHERNET
USER
SERIAL 1
SERIAL 2
To Serial
3 port
26. Connecting the RS232 terminal
Connect the RS232 terminal to the MX IP as illustrated in the figure below.
See Appendix A for the RS232 Terminal Connector pin-out.
16