Installation guide

INSTALLATION GUIDE
21. The RS232 power options
1. USB connection for power only – see Figure 14.
To System Out port of
previous unit
To System IN port of next
unit
To USB Port
(for power only)
To System In port
To System Out port
To RS232 Port
Shielded CAT5 FTP System cables
Figure 14 The Specter RS232 connections
2. Server without USB - connect a USB to PS/2 Adapter – illustrated below.
Connect the adapter to the Keyboard port.
Figure 15 The USB to PS/2 Adapter
3. External power - connect USB connector to power adapter
22. Connecting the Specter SUN
Connect the Specter as illustrated in the figure below. Connect the Specter to a
computer with the built-in cables. Connect the Specter to the Phantom system
using Shielded CAT5 FTP cables. The Phantom Specter draws its power via the
computer’s Keyboard port.
To System Out port of
previous unit
To System IN port of next
unit
To Computer’s
Keyboard Port
To Computer’s
Video Card
Shielded CAT5 FTP System cables
To System In port
To System Out port
Figure 16 The Specter SUN connections
14