Installation guide

PHANTOM MX IP
SYSTEM INSYSTEM OUT
Phantom
Specter
OUT
IN
Figure 12 The Phantom Specter ports
19. Connecting the Specter II PS/2
Connect the Specter as illustrated in the figure below. Connect the Specter to a
computer with the built-in cables. Connect the Specter to the Phantom system
using Shielded CAT5 FTP cables. The Phantom Specter draws its power via the
computer’s Keyboard port.
To System Out port of
previous unit
To System In port of next
unit
To Computer’s
Keyboard Port
To Computer’s
Mouse Port
To Computer’s
Video Card
Shielded CAT5 FTP System cables
To System In port
To System Out port
Figure 13 The Specter II PS/2 connections
20. Connecting the Specter RS232
To connect the Specter RS232:
1. Connect the Specter to a computer with the built-in cables – see the figure
below.
2. Connect the Specter to the Phantom system using Shielded CAT5 FTP cables.
13