Installation guide

INSTALLATION GUIDE

12.

13.

Pre-installation instructions

• Switch off all computers, and disconnect the power cords

• Place cables away from fluorescent lights, air conditioners, and machines that

are likely to generate electrical noise

• Ensure that the total cable length does not exceed 110m / 360ft

The MX IP system cables

The MX IP package contains the following cables.

3 in 1 CPU cable

Null Modem cable

CAT5 FTP cables

RS232 Serial cable

14. Connecting the MX IP

Connect the MX IP as follows:

1. Connect the power cord and Ethernet and/or modem connection.

When connecting an optional local computer follow steps 2 and 3.

2. Connect the connectors of one end of the 3 in 1 CPU cable to the KVM

Computer ports of the MX IP.

3. Connect the connectors of other end of the 3 in 1 CPU cable to the KVM ports

of the host computer.