Smart 116 IP User Guide

SMART 116 IP
7
7.1 LED and button table
LED Function
Power Power Indicator
Remote Illuminates when remote session is active
Link Unit is connected to the system
Button Function
Local When pressed, Smart 116 IP disconnects the Client computer’s link to
the Target Server and the local mouse and keyboard become
operational. The Remote LED turns off.
Reset Press and hold for more than 7 seconds to reset the Smart 116 IP unit
Power
connector
POWER
100-240 VAC 50/60 Hz
Server ports
I
0
12345678
101112131415169
Keyboard
Mouse
Monitor
CONSOLE
LAN (Ethernet)
connector
FLASHLAN
SERIAL
Flash
(download)
connector
Figure 2 Smart 116 IP ports – side 2
7.2 Connector table
Connector Function
Console KVM (Optional) Connect a keyboard, video and mouse to operate the
Smart 116 IP locally
Serial This port is for future Serial functionality
Flash To update firmware of the analogue part of the Smart 116 IP
system - OSD, Switch, RICCs and RoCs.
LAN Connect to 10/100 Mbit Ethernet. Yellow Led illuminates when
connected to LAN. Green LED illuminates when a remote session
is in progress
Server ports Connect to servers via RoC/RICCs
8. Pre-installation guidelines
· Place cables away from fluorescent lights, air conditioners, and machines that
are likely to generate electrical noise