User guide

Conducting a Remote Session
Starting a Remote Session
User Guide | 53
Figure 43 – Server Targets
The following table describes the Targets page parameters and buttons.
Parameter/Button Description
Server Name
The server name. The server name can be changed in the
Configuration settings to give the server an identifiable name (see
Section 3.6).
Server Status The status of the server. It can be available, off, busy (meaning that
another user is accessing the server), or Remote Active Session.
User
The current user (if any) accessing the target server.
Pressing this button reloads the page. Can also be accessed from the
Action dropdown menu.
Pressing this button starts a remote session for the selected target
server. Can also be accessed from the Action dropdown menu.
2. In the Server Name column, select the target server that you want to connect to, by
highlighting it and clicking
, or by double-clicking it.