User guide

Conducting a Remote Session
Starting a Remote Session
52 | Smart 216/232 IP
4 Conducting a Remote Session
A remote session enables remotely accessing any of the target servers connected to
Smart 216/232 IP. Before starting a remote session, Smart 216/232 IP must be fully
configured.
You can perform the following from the remote session:
 Display/hide the toolbar.
 Set the session profile.
 Display the session in full screen mode.
 Verify Remote Presence Solutions information.
 Adjust video settings.
 Power manage the target servers.
 Manage keyboard sequences.
 Synchronize mouse pointers.
 Switch to a different server or device.
4.1 Starting a Remote Session
You can start a remote session by:
 Logging into the system, as explained in steps 1 to 5 of the procedure in Section
3.2
 Select
ing the target that you want to connect to
 Displaying the target inside a remote console window
To start a remote session:
1. Log into the Smart 216/232 IP system, by following steps 1 to 5 of the procedure
in Section 3.2.
The Targets screen appears. Onl
y targets that the User is permitted to use,
appear on the page. As an Administrator can access all connected targets, they all
appear on the Targets page, as in the following figure.