User guide

Configuring the Network
Saving Changes and Logging Out
50 | Smart 216/232 IP
Saving the configuration changes after changing the Device page restarts the unit
automatically.
To save changes:
1. In the Configuration page toolbar, click the
button.
If you made changes to the Device page, the system automatically prompts you
to reboot and restart the device, by displaying the following device reboot
confirmation box:
Figure 39 – Device Reboot Confirmation Message
3. Click Yes.
A message box informs that Save has completed.
Figure 40 – Save Succeeded Message
4. Click OK.
Device reboots, and when it completes a Logon page appears.
Figure 41 – Device Rebooting Progress Box