User guide

Configuring the Network
Reloading a Page
User Guide | 49
Figure 38 – Backup/Restore Data Page
2. In Backup to file, click the Browse button to locate and select the file on which to
store the configuration data.
3. Click Backup.
The configuration data is backed up.
4. Click Close.
To restore data:
1. In the Backup/Restore Data page (see Figure 38), in Restore data from file, click the
Browse button to locate
and select the file which contains the data to restore
.
2. Click Restore.
The configuration data is restored.
3. Click Close.
3.14 Reloading a Page
You can load the parameters on any configuration page with the settings from the
Smart 216/232 IP device. This is convenient if you have already changed settings on
the page, and want to restore the device settings.
To reload a page:
1. In the Configuration page toolbar, click the
button.
The parameters are populated with the device settings.
3.15 Saving Changes and Logging Out
Once you have completed configuration changes, you must save them.
Changes to the SSL Certificate and Security pages require saving and restarting.