User guide

Configuring the Network
Configuring Power Devices
42 | Smart 216/232 IP
3. In PDU Name, type a meaningful name for the PDU.
4. In Type, select the PDU type.
The number of outlets in the device is displayed in Outlets.
5. In IP, type the IP address of the PDU.
6. Click OK.
The PDU is added to the Power Devices page.
Figure 28 – Added Power Devices
3.11.1 Editing a Power Device
You can modify the information of any defined power device.
To modify power device details:
1. In the Power Devices page, select a power device, and click the Edit button
.
The Edit PDU page appears.
Figure 29 – Edit PDU Page
2. Select/type new values for the PDU Name, Type, and/or IP address, as required.
3. Click OK.
The Power Devices page opens with the modified details.