User guide

Configuring the Network
Configuring the System Date and Time
40 | Smart 216/232 IP
Figure 24 – User Targets Page
2. From the
User dropdown menu, select a User.
3. Select the checkboxes of all the Target servers that the User can access (according
to the User’s access permissions).
To select all Target servers, click Select All Targets.
3.10 Configuring the System Date and Time
This section describes how to configure the system date and time. The system time
and date are used when recording log events (see Chapter 5).
To configure the date and time:
1. From the configuration menu, select Date & Time.
The Date and Time page appears.