User guide

Configuring the Network
Configuring the Serial Port Settings
36 | Smart 216/232 IP
3.7 Configuring the Serial Port Settings
When you have Serial device(s) connected to the system, you must configure the
Serial Port settings of each device.
If you have a Minicom Serial Remote Power Switch, it must be connected to Serial
Port 1.
To configure the serial port settings:
1. From the configuration menu, select Serial Port.
The Serial Port page appears.
Figure 22 – Serial Port Page
2. For each serial device connected, type a Device Name and choose the correct device
parameters.
3.8 Configuring the Security Settings
This section describes how to configure the security features, such as Account
Blocking, Password Policy, Idle Timeout, and Serial Terminal Policy.
For local and remote users, you have the option of a standard or high security level of
password. The following table describes both these options.