User guide

Configuring the Network
Changing your Password
28 | Smart 216/232 IP
Tab Description
Switch Configuration
For configuration of the KVM switch settings
Serial Port
For configuration of the Serial port settings
Security
For configuration of the security settings
User Targets
For configuration of the access rights of each user to target servers
Date & Time
For configuring the system date and time
Power Outlets
For matching a server to each power outlet of all power devices defined in the
system
Power Devices
For configuring the details of all power devices in the system
3.2.2 Web Configuration Toolbar Buttons
The following table describes the functionality of the Web configuration toolbar
buttons.
Button Functionality
Saves the configuration changes
Reloads the device settings into the configuration page parameter settings
Reboots the device
Upgrades the device firmware
Upgrades the RICC/ROC firmware
Restores the device with factory settings
Backs up or restores configuration data to/from a file
Installs the SSL certificate onto the device
3.3 Changing your Password
You can change your password, according to the set password policy.
To change the password:
1. In the menu in the left pane, click
.
The Change Password page is displayed.