User guide

Configuring the Network
Logging Onto the Web Configuration Interface
User Guide | 27
5. Click Enter.
The Targets page opens, displaying all your available target servers (see Figure
43).
6.
In the menu in the left pane, click
.
The Network configuration page appears with the Device tab open.
Figure 15 – Network Configuration – Device Tab
From the Configuration menu, you can configure the network, Users, Switch
Configuration, Serial Port, Security, User Targets, Date & Time, Power Outlets,
and Power Devices settings. After making all configuration changes, you must click
the
button in the toolbar for the changes to go into effect.
3.2.1 Web Configuration Interface Tabs
The following table summarizes the Web configuration interface tabs.
Tab Description
Device
For configuration of the device settings, IP address, and centralized management
Users
For adding, editing, deleting, and blocking system Users