User guide

Installation
Connecting to the Network
22 | Smart 216/232 IP
Figure 10 – ROC USB
To connect the ROC USB:
1. Connect the Screen connector to the computer’s video card.
2. Connect the USB connector to the computer’s USB port
.
2.7 Connecting to the Network
Before powering on Smart 216/232 IP, you can connect the Smart 216/232 IP to the
network.
To connect the Smart 216/232 IP to the network:
1. Connect the network cable to the LAN port of the Smart 216/232 IP.
2.8 Connecting the CAT5 Cables
Perform the following procedure for each computer to which you want to connect
CAT5 cables.
To connect the CAT5 cables:
1. Connect one connector to the ROC RJ45 port.
2. Connect the other connector to one of the Smart 216/232 IP computer ports.
2.9 Connecting the KVM Console
You can connect a KVM console to Smart 216/232 IP, in order to operate the system
locally.