User guide

Installation
Connecting to the Servers
User Guide | 21
Figure 9 – ROC PS/2 Connections
You can connect the ROC PS/2 to a powered on computer, by performing the steps of
the following procedure in order.
To connect the ROC PS/2 to a powered on computer:
1. Connect the Mouse connector to the computer’s Mouse port.
2. Connect the Keyboard connector to the computer’s Keyboard port.
3. Connect the Screen connector to the computer’s Video card.
Failure to connect in the above order while the server is running may lead to
the mouse malfunctioning until the server is rebooted.
2.6.2 Connecting a ROC USB
The ROC USB supports Windows 98 SE and later, MAC, SUN, and SGI, and all modern
Linux distributions.
The following figure illustrates the ROC USB and its connections.