User guide

KVMS EXTENDER
13
Update the DDC information if you replace the monitor.
For a dual control scenario, we recommend using similar monitors at both
locations. When the monitors are not similar, input the DDC information of the
lower resolution monitor.
8 Video brightness and tuning
Where the image quality is unsatisfactory you can adjust it in the following 2 ways:
· Video Adjustment hotkey - 6 looped preset adjustments
· Video Adjustment tuning – for fine tuning
Press 8 to enter the Video adjustment settings.
Video Adjustment hotkey
Adjust the video quality using the 6 looped preset adjustments. Press D until the
picture quality is satisfactory.
Once you have a satisfactory image, press Enter twice to save and exit the option.
Video Adjustment tuning
Where the image needs further tuning after using the video Adjustment hotkey, do
the following:
Open the test card located on our website www.minicom.com/support/skew.png or
www.minicom.com/support/skew.gif or, on the supplied CD. See Figure 13. This
image will help you get the best screen image. It can also help to correct skew.
Figure 13 Test card