User guide

Operating the Smart 108/116 IP Switching System Locally
Upgrading the Smart 108/116 IP Firmware
User Guide | 83
3. Click .
The hardware version of the Translator appears.
Figure 64 – Hardware Version Report
RICC/ROC Version
Before you can select a RICC/ROC, you must clear the 108/116 IP Switch checkbox.
To verify the RICC/ROC version number:
1. Select one or more or all of the RICC/ROCs.
2. Click
.
The firmware version number appears.
3. Click
.
The hardware version number appears.
When “Not responding” appears, it indicates that no computer is connected, or
that it is switched off.
6.3.8 Obtaining New Firmware
Download the latest firmware for your system from www.minicom.com.
Updating the Firmware
During the Update process, do not switch off any computer connected to the
Smart 108/116 IP system.