User guide

Operating the Smart 108/116 IP Switching System Locally
Upgrading the Smart 108/116 IP Firmware
82 | Smart 108/116 IP
Figure 62 – Communication Port Dialog box
4. Choose the Com Port that the RS232 Serial cable is connected to, and click OK.
6.3.7 Verifying the Version Numbers
Before upgrading the firmware, you must verify which firmware and hardware
versions you have.
Smart 108/116 IP Switch Version
To verify the Smart 108/116 IP Switch version:
1. Select the 108/116 IP Switch checkbox.
2. Click
.
The firmware versions of the Translator, Master, and OSD appear.
Figure 63 – Firmware Version Report