User guide

Operating the Smart 108/116 IP Switching System Locally
Using the OSD
76 | Smart 108/116 IP
 Tune (F5)
 Move Label (F6)
 New Monitor - DDC2 (F10)
You can view the available functions from the OSD Help window.
To view the available OSD functions:
1. In the General settings window (see Figure 54), press F1.
The Help window appears. It
displays the functions that can be performed from
the main window (see Figure 52).
Figure 59 – The OSD HELP Window
All the functions listed in the Help window can be performed from the Main
window. The Help window is merely a reminder of the hotkeys and their
functions.
Scanning Computers (F4)
When necessary, you can adjust the scan time in the Time Settings window (Figure
56).
To activate scanning:
1. Press Shift twice to open the OSD.
2. Press F4.
Your screen displays each active computer sequentially, with the Scan label
appearing in the top left corner.