User guide

Operating the Smart 108/116 IP Switching System Locally
Using the OSD
74 | Smart 108/116 IP
 In the LBL column – Typing 999 displays the label continuously; typing 000
hides the label.
 In the T/O column – Typing 999 disables the Timeout function. Typing 000
causes the Timeout function to work immediately.
 In the SCN column – Typing 999 displays the screen for 999 seconds. Typing
000 causes the computer screen to be skipped.
6.2.7 Configuring the Users Settings
To configure the users settings:
1. In the OSD Settings window (see Figure 53), navigate to USERS so that
the red
line is on it, and press Enter.
The Users Settings window appears.
Figure 57 – Users Settings Window
Users is only enabled if the security status is set to On (see the Configuring
Security Settings section on page 69).
There are three different access levels:
 Y – Full access to a particular computer.
 V – Viewing access only to a particular computer (no keyboard/mouse
functionality).
 N – No access to a particular computer; a TIMEOUT label appears if access is
attempted.
To give each user the desired access level:
1. In the Users Settings window, navigate to the desired computer line and User
column.