User guide

Operating the Smart 108/116 IP Switching System Locally
Using the OSD
User Guide | 73
 U3 for IBM AIX
To modify the keyboard settings:
1. In the Ports Settings window (see Figure 55), navigate to the KB
column, and go to
the line that you want to edit.
2. Press the Space bar to toggle between the available options.
6.2.6 Configuring the Time Settings
To configure the time settings:
1. In the OSD Settings window (see Figure 53), navigate to TIM
E so that the red line
is on it, and press Enter.
The Time Settings window appears.
Figure 56 – Time Settings Window
Setting the Scan, Label, and Timeout Period
In the Time Settings window, you can set the following:
 SCN – the scan period
 LBL – the display period of the Confirmation label, showing which computer is
currently accessed
 T/O – the timeout period. When password protection is activated, you can
automatically disable the Management keyboard, mouse, and screen after a
preset time of nonuse.
To set the above periods:
1. Navigate to the desired column and row.
2. Place the cursor over one of the three digits and type a new number for the new
time period. Type a leading zero where necessary. For example, type 040 for 40
seconds. The numbers 000 and 999 are reserved, as follows: