User guide

Operating the Smart 108/116 IP Switching System Locally
Using the OSD
72 | Smart 108/116 IP
Figure 55 – Ports Settings Window
Editing the Computer Name
In the Ports Settings window, the computer names can be up to 15 characters long.
To avoid confusion, the names given in the OSD should match the names given
in the Web configuration.
To edit a computer name:
1. In the Ports Settings window (see Figure 55), navigate to the Name col
umn, to the
name that you want to edit.
2. Edit the name, as follows:
 To erase a character – Select it and press the Space bar. A blank space
replaces the erased character.
 To erase an entire line – Place the cursor at the beginning of the line, and
keep the Space bar depressed until the line is erased.
Modifying the Keyboard Setting
The Smart 108/116 IP operates with Windows, Linux, HP UX, Alpha UNIX SGI, DOS,
Novell, MAC-USB, or Open VMS.
By default, the keyboard mode is set to PS, which is suitable for Intel-based
computers and UNIX servers connected to ROC/RICCs USB.
For systems with UNIX servers connected to ROC/RICCs PS/2, set the KB column as
follows:
 U1 for HP UX
 U2 for Alpha UNIX, SGI, and Open VMS